The BIOS for workstation motherboards, at least from the ones we have tested, are not different from the main channel line of motherboards.  This is mainly due to the motherboard unit at ASUS that produces the workstation is also the same unit that deals with the consumer lines.  As a result, we get a near identical BIOS to the recent Z87 line of motherboards (updated with Last Modified, My Favorites, Quick Note etc), with one or two options aimed specifically at the WS.  As one might imagine, there is fewer automatic overclock options provided due to the nature of the market being aimed at (as well as the fact that Xeons are multiplier and CPU strap locked), but our analysis is essentially the same as our other reviews on this BIOS generation.

Since the inception of graphical interfaces for consumer motherboard BIOSes, motherboard manufacturers have been keen to give the user as much functionality as they need without going overboard with garish visuals, as well as catering for users who are new to the BIOS.  The Z77 platform BIOS from ASUS was well received, giving users a large number of options for configuration in a textual format – the implementation that debuted with Z87 and is on the P9X79-E WS is another iteration along similar lines with a few new interesting points.

Firstly when we enter the BIOS, we get our ‘EZ Mode’ (‘easy’, rather than ee-zed) similar to the last generation but with a few minor updates.  Firstly the font is changed to a pixelated form of common fixed-length word processing fonts:

On this front screen we get detail on the motherboard in use, the BIOS version, the CPU installed, the speed of the CPU, the total memory installed, the CPU information (temperature/voltage), the DIMM slot recognition and fan speeds.  An addition to this screen is that we can apply XMP without going into Advanced mode with a small drop down in the DRAM Information section.  The fans too can be adjusted with their own drop downs:

For users that want to access Advanced Mode but a specific menu, the Shortcut (F3) option at the bottom defaults to the following:

When entering the BIOS Advanced Mode, we get put into the Main tab to begin with:

Several options are new to the BIOS that are worth pointing out.  On the right hand side we have two new options – Quick Note and Last Modified.  By choosing Quick Note, a user can leave notes in a notepad type window for future reference. Last Modified does what it says on the tin – it tells the user what options have been changed in the BIOS since the system was booted.

Another feature shown on the Main screen is on the right hand side and in yellow, labeled ‘F4: Add to Shortcut and My Favorites’.  This is pointing to the tab on the top left of the BIOS, called ‘My Favorites’.

My Favorites allows users to select any option in the BIOS they want and place it in this menu.  This is of invaluable help to overclockers who use the BIOS frequently – it allows these users to place the options they used most frequently (CPU Ratio, CPU Voltage, Memory sub-timings) into a single menu rather than shuffle around several menus at once.  It solves the issue of ‘what is the right way to show your options’, as almost all the different motherboard manufacturers have their own way.  Also in terms of customization, users can place their own overall tabbed menu options into the shortcut menu.

The main series of options are all found in AI Tweaker, the home for overclocking options.

One of the many positives about the ASUS BIOS is the information provided with options in the top right corner.  For most of the options it provides an explanation of what the option does - if it comes with Auto/Manual selections these are described as well.  As for AI Tweaker itself, our options are split into CPU+DRAM, voltages and more voltages.  Advanced options for DRAM subtimings and power control are in sub menus off this main list:

Unfortunately we do not get the GPU options similar to Z77 ROG boards which show which GPUs are in the motherboard at POST.  This is a little unfortunate to be overlooked for a WS motherboard.

In the Advanced menu are the controller options and additional CPU/power state adjustment options.

In the Onboard Devices options above show the available controller options, and for Xeon Phi users the option in System Agent has to be enabled:

BIOS fan controls are found under the Monitor tab menu:

Ideally users will head to the OS for more extensive fan controls, but ASUS offers the basics here – an RPM lower-bound limit with silent/standard/turbo fan profiles.

Elsewhere in the BIOS we have boot options for fast booting, boot order, boot override, and also utilities such as EZ Flash and ASUS’ OC Profiling.

ASUS P9X79-E WS Software

One of the old habits of X79 launch for ASUS is AI Suite II.  While on Z87 and the Rampage IV Black Edition (a new build) the system is designed to use AI Suite III, for the P9X79-E WS we get AI Suite II, which still has much of the functionality except the slicker interface and DIP4 overclocking options.  Instead we go back to a TPU/EPU arrangement in the options.

AI Suite

AI Suite starts as a simple bar with buttons for the software tools, monitoring and updates, as well as a tuning button to allow the software to perform overclocking.  As part of our reviews of the P8Z77-V Pro and the P8Z77-V Deluxe, we have covered most of this software, including:

TurboV Evo: Overclocking tools.
DIGI+ Power Control: Adjusting power delivery to the system.
EPU: Energy saving functionality.
Fax Xpert: Fan control and management.
Probe II: Monitoring temperatures, voltages and fan speeds.
Sensor Recorder: Time comparison charts for Probe II.
AI Charger+: Fast USB 3.0 charging for BC 1.1 compliant devices.
USB 3.0 Boost: Increased USB 3.0 speed.
ASUS SSD Caching II: SSD Caching using ASUS technology and Marvell controllers.

Here are the key features:

TurboV Evo

The overclocking heart of AI Suite is TurboV Evo, which allows users to adjust the voltages and BCLK of the system in real time.  I typically use this software to find basic OS limits, and then attempt to boot into OS at that speed to give a little headroom.

Part of TurboV Evo is the Auto Tuning section, which gives users two choices for automatic overclocks - Fast and Extreme.  Both of these are covered in the Overclocking part of this review.

DIGI+ Power Control

One of the features that ASUS likes to advertise as part of their motherboard range is the ability for the user to adjust how the power delivery responds to load.  These options help maintain constant voltage under busy periods (useful for stability testing and overclocks), or can be used to reduce the power usage of the motherboard and increase life expectancy.  Along with the BIOS controls, ASUS also offers software tools in AI Suite to perform these operations.

Fan XPert

In order to separate itself from the rest of the motherboard manufacturers, ASUS does like to parade their fan technology.  By using upgraded fan controllers on board, a combination of hardware and clever software allows ASUS to control their fans like no other.  From the software perspective, we have Fan Xpert.

Fan Xpert will auto tune the fans, giving each one a power vs. RPM curve (as fans do not linearly increase in speed with applied power).  The user can then adjust a multi-point power against temperature curve for each of the fans in the system.  In my case, I like to have my fans run as quiet as possible when idle and during videos, and as fast as they can during gaming.

SSD Caching

For users that want to use a small SSD as a cache to a larger hard drive, ASUS use Marvell controllers on the P9X79-E WS to allow the system to use SSD Caching.  This was all the rage when prices for SSDs were $2+ per GB, but now we are down to less than a quarter that in some cases, which suggests that SSD Caching might have had its time.  It is still part of the X79 system however.

Marvell Storage Utility

While not from ASUS, the motherboard does come with the software in order to manage the Marvell SATA ports in terms of arrays.  The controller is capable of RAID 0, 1 and 10 (unfortunately not RAID 5), and the web-based interface is similar to other Marvell systems we have reviewed before.

Overview, Visual Inspection, Board Features In The Box, Overclocking
Comments Locked


View All Comments

  • mapesdhs - Wednesday, January 15, 2014 - link

    Makes perfect sense if you need to build something now. :D I've been talking to a movie
    guy who's about to construct something based on this E revision. Similar to mine but better
    GPUs, beginning with one 780Ti, expanding to 4 later. Only slight hitch is I've been trying
    to convince him to use a Corsair H110 for the CPU instead of a big HS, the latter making
    transport more difficult. Either way, it'll be a good AE system until he switches to a dual-socket
    24-core XEON setup next year.

    The only thing really missing from X79 (apart from a proper 8-core consumer chip option)
    is more Intel SATA3 ports which don't suffer from the perils one can encounter with Marvell
    ports. Both performance and reliability are better with the Intel ports, in some cases by a
    huge margin. People harp on about USB3, but a lot of pro users I know rarely use it and if
    they do need a USB link they're usually happy with USB2. Depends on the task though of
    course, I'm sure some would find it important.

  • almajnall - Wednesday, January 15, 2014 - link

  • dzezik - Monday, February 10, 2014 - link

    if You compare this funny mobo with professional supermicro e.g. X9SRL-F (7 PCIe slots for server use) or X9SRA for workstation it looks like a toy for kids. ASUS uses a lot of tricks but it cant overcome 40 lanes limitation from single CPU. motherboard is to complicated. 64GB of RAM is the limit? something is wrong with ASUS, Supermicro support 512GB. If You go for XEON chose Supermicro and Tyan
  • mazzy80 - Friday, February 21, 2014 - link

    Actually the SM boards look more like demo sample that a real board with so few surface Caps, Mosfet that this Board. :)
    The reality that they're not necessary to run the system at stock with the wide margin on Xeon about voltages.
    BTW, the 64GB limit is about UDIMM Vs RDIMM, only on the C600 series the RDIMM & UDIMM are supported, on X79 only UDIMM.

    SM rocks, you can't really go wrong with them for WS/Server rig.
  • Hale_Kyou - Tuesday, March 4, 2014 - link

    The 64 Gb limitation is in Intel Xeon and i7 CPUs, the same. For buffered memory. 500-700 Gb are supported with buffered memory on E5 Xeons only (E7 have hybrid controllers with external components). Buffered memory is MUCH slower than unbuffered due to penalties introduced by buffer and its latent logic. The same, inter-CPU RAM access introduces big penalties on multicore Xeon sustems. That's why sometimes (generally in HPC simulations) single core system with unbuffered RAM is preferred.
  • Hale_Kyou - Tuesday, March 4, 2014 - link

    there's a typo. Of course 64Gb limitation is for unbuffered RAM both in Xeon and i7. The limitation is removed on latest server-oriented Atoms.
  • EdB1 - Thursday, July 31, 2014 - link

    Hi djezik, although your post is fairly old, I had a look at the two board you mentioned, and they don't have the same PCI-E lanes expansion capabilites as the P9X79-E WS board, which has 72 PCI-E lines, due to 2 additional PLX chips, and can run at 16x x 4 slots at full speed or 2 x 16x and 5 x 8x, the two boards you mentioned do have greater mem capacity though, ie; 512GB ECC vs 64GB ECC or non ECC.

    So it really depends what you need this board to do. If you want to put 4 x 16X graphics cards in at once and don't need more than the 64GB ram limit, then this is the board to get, but if you do need more that the 64GB then the ASUS should not be considered.
  • Hale_Kyou - Monday, March 3, 2014 - link

    Liars! x79 DOE NOT support "full turbo mode (4.0 GHz) no matter the loading"
    "One new feature called ASUS Ratio Boost is in the BIOS, which implements MultiCore Turbo for Xeon CPUs"
    Is a lie, according to ASUS itself. I don't know why did they trick people this dirty way. Maybe Intel pays them for spreading weird rumors. But ASUS says that turbo bins can not be reconfigured on their boards for XEON CPUs!
  • Hale_Kyou - Monday, March 3, 2014 - link

    P.S. Of course it works on i7, that's why they lied about Xeon, but "proofed" with screenshots only with i7X running "all core full turbo".
  • ReneGQ - Thursday, March 13, 2014 - link

    I recently purchased an Asus Motherboard and the problems started from day 1. The drivers update never works, the same for AI Suite III (there´s a lot of updates for this model in Asus webpage). After 2 months I still can´t install BitDefender cause a clock watchdog error.
    Asus technical support is the worst, mails comes and goes with no solution.
    I will not recommend this brand to anyone. The brand has a very good Marketing but the product and the service are very disappointment.

Log in

Don't have an account? Sign up now