Introducing the BitFenix Prodigy

The mini-ITX form factor is starting to pick up steam these days, and with good reason. Micro-ATX boards are already capable of essentially hitting feature parity with full ATX boards, including multi-GPU support, while many mini-ITX boards include almost all the bells and whistles an end user could need. With the right board it's just not that hard to build a powerful gaming system in a fraction of the space it used to require.

There's also been a slow trickle of new mini-ITX enclosures designed to support that kind of hardware, but even these enclosures have had their limits unless you were willing to spend through the nose on a Lian Li case. That changes today with the BitFenix Prodigy, a $79, full-frills mini-ITX enclosure designed for maximum performance in minimum space. If you're looking to build a powerful mini-ITX system with a single graphics card, this may very well be the case you've been waiting for.

I had a reader e-mail me asking why we even bother with lower profile releases from less well known brands, and I argued that just because a brand isn't as big as, say, Antec, SilverStone, or Lian Li doesn't mean they aren't worth investigating. On the contrary, sometimes you have the privilege of bringing to light a fantastic product that people simply wouldn't have known about. WIth the Prodigy, BitFenix has an enclosure that absolutely merits your attention. It isn't perfect, but for a first effort priced at just $79, it doesn't have to be. Here's the quick overview:

BitFenix Prodigy Specifications
Motherboard Form Factor Mini-ITX
Drive Bays External 1x 5.25"
Internal 2x 3.5"/2.5", 3x 3.5"/2.5" in modular cage, 4x 2.5"
Cooling Front 1x 120mm intake fan (supports up to 230mm)
Rear 1x 120mm exhaust fan (supports up to 140mm)
Top 2x 120mm fan mount
Side -
Bottom -
Expansion Slots 2
I/O Port 2x USB 3.0, 1x Headphone, 1x Mic
Power Supply Size ATX
Clearances HSF 170mm
PSU 140mm or 160mm non-modular
GPU 7" with modular drive cage/12.5" without
Dimensions 9.84" x 15.9" x 14.1"
250mm x 404mm x 359mm
Special Features USB 3.0 via internal header
Support for 240mm radiator
Price MSRP $79

Ordinarily in the spec sheet I wouldn't mention support for a 240mm radiator as a special feature, but on the BitFenix Prodigy things are a bit different. Take a moment to really let all that expandability sink in; even with just a 230mm intake fan and a 140mm exhaust, you could turn this case into an incredibly efficient and incredibly quiet enclosure.

It's remarkably flexible for its size, essentially allowing the end user to make a series of tradeoffs to suit the needs of their build. If you're willing to give up the 5.25" bay, you can easily fit a 240mm radiator in the top. If you want to install a full-sized graphics card, you can remove the middle modular drive cage. You're down three 3.5" drive bays, but there are still two left over in the bottom of the case. These are all compromises but they're your compromises to make depending on your needs. Let's find out just how it all fits together, shall we?

In and Around the BitFenix Prodigy
Comments Locked

79 Comments

View All Comments

  • Peter_s - Friday, June 1, 2012 - link

    I bought in 2004 this case. Looks like a MacPro? Not realy. But it is keeps my stuff cool.
    I removed the lower handle (stand). The cas had not a good stand with it. As one posted the Bitfenix lacks stability too.

    P.S. I own a lot of Apple's hardware too. Simply for convenience ;-)

    But will I (you) buy a MacProCase and do all fiddling to fit a PC in? I will go this route.

    Probably I will buy th Bitfenix and remove the handle the plastic stand immediatly.
  • Peter_s - Friday, June 1, 2012 - link

    Oops
    got this case in 2004 (MacPro inspired)

    http://www.caseumbau.de/test263/bild002.jpg
  • Guspaz - Friday, June 1, 2012 - link

    I recently bought a Shuttle SZ77R5 (apparently one of the first Shuttle XPC units to support replacing the mobo with a mini ITX mobo). One of my friends kept insisting that it was, at $340, supremely overpriced. On the other hand, it's not just a case, it also comprises a motherboard, power supply, and CPU cooler (although I won't count that since Intel CPUs come with one free).

    So, how expensive is it, relatively speaking? I'll compare the cost of a similarly built BitFenix:

    BitFenix Prodigy: $79
    80+ bronze PSU: $65
    Asus Z77 mini-itx mobo: $200

    The mobo is expensive, but NewEgg only sells two mini ITX Z77 models. The other one is cheaper, but neither of these have as much connectivity options as the Shuttle (neither has 4 DIMM slots, a second 4x PCIe slot, a miniPCI slot, or an mSATA slot), so it's probably still a fair comparison.

    What do we get? A fully configured BitFenix would be $344 and still not match the featureset... Suddenly that Shuttle doesn't seem so expensive anymore, does it?

    I'm not knocking the Fenix, mind you, I'm just venting at my friend who will probably never see this.
  • GotThumbs - Friday, June 1, 2012 - link

    I really like the layout of this case. The quality seems to be very good and I personally don't care about the name on the case....as long as the build quality is good. Being able to add my choice of PS is a good feature. I'd be interested in getting this case if it was just a little smaller in size. I'm currently using a modified APEX MI-008 for my WHS. I pulled out the 5.25 drive cage and have four drives suspended in the front. I only need a box large enough to hold the ITX board and HD's. I rip my content on my main system and then load onto the server, so no need for an optical drive in the server. I'll be keeping my eye on this company and their case selection.

    Good article and appreciate the photos and not limiting reviews to only 'Big" name brands. Only a fool would accept limiting their options IMO.
  • DesertCat - Friday, June 1, 2012 - link

    To be fair, many of the cases that are competitors to this unit also do best with ATX PSUs that are only 140mm long. I think some people with the Lian Li PC-Q11 have been able to use 150mm long PSUs but things start to get really crowded between the front intake fan and the back of the PSU. Having about half of your front intake fan blowing onto the back of the PSU at a distance of 1 cm isn't exactly ideal. With some of their other models, long PSUs will run into the drive cage. So... I think BitFenix is going with a PSU length that is typical for many of these cases (though people may still not like that).

    For those that don't mind having a non-modular PSU (and the associated cable tucking), an ideal solution for many of these little cases is the Nexus NX-5000 R3 (530W) or NX-6000 R3 (630W). They are only 125mm long. That is a model that doesn't show up at many of our favorite online retailers though, but a bit of search engine magic will allow people to find a U.S. retailer that carries them.
  • versesuvius - Friday, June 1, 2012 - link

    The case is 25 cm thick? And this is supposed to house a micro ATX board? At 40 cm height, it is already an ATX case. So, what is the point of the micro ATX board? Who is this case trying to fool?
  • LOUiECOG - Friday, June 1, 2012 - link

    Mini-ITX
  • versesuvius - Saturday, June 2, 2012 - link

    Just the same. This case is just too big for the board. No point in using it for any purpose. BitFenix already produces cases that are cheaper than this, look a lot better and have the same volume, that can house boards and cards much larger than this case can accommodate, with the most important benefit that they have a %20 less footprint. When people are talking about small in workplace or home they are not usually talking about the height, it is mostly about width and depth. This case fails on both accounts.
  • Sogekihei - Monday, June 4, 2012 - link

    And yet this probably wouldn't exist if there wasn't some demand for such a product. Clearly somebody wants to build mini-ITX for whatever reason (lowered power consumption, integrated components such as Bluetooth and WiFi adapters) but still have a moderately powerful system, perhaps for home theatre purposes or as a game console/arcade game emulator. Considering all of the Sandy Bridge and Ivy Bridge-based mini-ITX boards available as well as the presence of moderately powerful single slot-width graphics cards such as some revisions of nVidia's GTS 450, this is not only possible but to some extent wanted by consumers, as such things would end production after their first iteration if they weren't commercially successful.

    As the article mentioned, mATX basically has the same features as ATX at this point with both offering multiple PCI-e slots and numerous slots for additional system memory. For purpose-built systems that don't need large quantities of RAM or multiple graphics cards, RAID controllers, dedicated sound cards, etc, mini-ITX might become the new low-end/mainstream form factor and replace mATX in that regard.

    I really feel like your complaints about this would have been equally applied back in the days when mid-tower and smaller case sizes first became prevalent, where you aren't seeing the full appeal of either the new mainboard form factor or you're under/over-estimating size differences; these days height can be a limiting factor with a lot of people wanting to have systems that they can place on a shelf of their entertainment center like a DVD player or video game console.
  • HardwareDufus - Friday, June 1, 2012 - link

    I have a heavily modified Travala C138 2Din Mini-ITX enclosure.

    It began life as a Stock C138 enclosure with a Via C7 mini-ITX board. CPU and Case Fans were 40mm. Held a slimCD/DVD and one 3 1/2 drive. (Travala has modified this model recently and now there is the option for two 2 1/2 drives.)

    I drilled many, many ventalation holes, machined out extra metal inside that blocked airflow, machined custom rails to accept the 2.5" drives, but allow for airspace on all 4 sides of the drives, etc...

    Now it holds an 80mm Silenex 11dba Intake on the right side, 80mm Silenex 11dba Exhaust on the left side... and a 80mm Silexex 14dba Fan on the low profile heatpiped copper cpu cooler. Upgraded the powersupply to 120W.

    I shortened/soldered/etc.. all cables for minimum space/folding.

    It is equipped with the Gigabye H55N motherboard, two Seagate 2.5" 7200pm 500MB harddrives, A clarksdale I5 DualCore HT processor (655K) overclocked to 3.8Ghz, and a Sony slim BlueRay DVD, 8 GBs of Ram.

    It is whipser quiet. Temps are reasonable... at full load I have seen the temps climb above 60degC, but normally stay around 40degC....not bad for living in the mexican desert...

    Well now I want to go to IvyBridge..at 4Ghz with 16GB of Ram.. and I want to swap out the harddrives for SSD. And I want to stay mini-ITX... The Asus Z77 mini-ITX Deluxe board looks fantastic.. but it has that weird raised power daughter card that will get in the way of my 80mm Intake....

    So, I'm looking for a better case. How frustrated I am that I cannot find one that matches mine..... I don't mind going a little bigger... But it seems you go tiny and fanless... or huge with space for 4 to 6 harddrives?

    The search is frustrating..

Log in

Don't have an account? Sign up now