GlobalFoundries – Expanding to Meet Demand

It’s been about a year since we last had a serious discussion with GlobalFoundries. Last CES, they were relatively recently separated from AMD and we didn’t have a whole lot to report; 12 months later, there’s a lot more going on. They are now doing full production of 45nm and 40nm chips, the latter going into many of the other electronics devices we use on a regular basis. Where AMD and Intel have lived on the 65nm, 45nm, and now 32nm nodes, most of the other IP developments are happening on the so-called half-nodes. Smartphones and their related technologies are the big one, and GF is working with many of the major players—Qualcomm, ST, ARM, and others. GlobalFoundries now has 300mm fabs in Germany, New York, and Singapore with additional 200mm fabs in Singapore; all told there are 12 locations with approximately 10,000 employees.

One of the big questions last year was how GlobalFoundries would handle the needs of other fabless semiconductor companies. The acquisition of Chartered Semiconductor increased their presence in a big way, also giving GF fabrication facilities in Singapore. While AMD continues to use nearly all of the 45nm capacity, the 40nm production has a long list of partners. The Dresden fab 1 is adding capacity and they’re pushing up to 80,000 wafers per month. The upstate New York fab 8 construction continues to progress, and demand for their services is great enough that GF has already begun working to expand the facility before the current construction is even complete! Fab 8 should come online in 2013, with production focused on 22/20nm output and capacity for around 60,000 wafers per month.

Right now, GlobalFoundries is entering full production mode for 32nm, with AMD’s Llano chips scheduled to be the first market solution to use the process. Later this year, AMD will also launch their Bulldozer cores on the 32nm process. In a similar vein, the 28nm node uses the same gate stack and will leverage the learning of their x86/32nm ramp. Qualification and production of 28nm will continue over the coming year, with plenty of new 28nm devices to come. One of the interesting points GF brought up is that in the past, doing test SRAM wafers has been the common practice for ironing out the glitches in a new process. SRAM wafers produce regular grids where errors are easy to detect; the problem is that complex logic stresses the latest process technology in a different way. To further help with process refinements, GF also runs a test SoC ARM Cortex A9 microprocessor design through the pipeline. The results of this test wafer not only help them find and fix problems, but they also give a better idea of how chips on the new process perform. The following slide summarizes what they’ve seen so far.

Bumping typical clock speeds from 1.5 to 2.0GHz for the lower power designs, and from 2.0 to 2.5GHz on higher performance chips is good, but even more importantly GF saw power requirements drop up to 30%. Providing 25-33% more performance using 30% less power (and a 100% increase in standby battery life) will be key to enabling the next generation of mobile devices, and we should continue to see a roughly two-fold improvement in performance at a given power envelope every couple of years. Over the course of the year we should see a major transition from 45nm to 32nm for AMD solutions, while the other devices should experience a similar transition from 40nm to 28nm.

GF looks to be doing well, and they are looking like a viable alternative to TSMC for companies looking for fabrication facilities. They have technologies ready for all the electronics segments, from CPUs and microprocessors to smartphones and DTV. They’re also looking at opportunities in the MEMS (Micro Electro Mechanical Systems, i.e. DLP, optical switches) and 3D stacking. Over the next two years, they should more than double their 300mm wafer capacity, and continue R&D into future technologies.

Moving beyond 32nm and 28nm, GlobalFoundries is well into the research and design phase on their 22nm and 20nm nodes. We asked about plans beyond 20nm, and GF says that the current planar transistor commonly used in today’s microprocessors should still be good for a few years. After that, they expect the next five or so generations of process refinements to move to more of a vertical arrangement for the transistor layout. Every so often the naysayers inevitably rear up and claim we’re reaching the end of what we can achieve with semiconductor technology. First it was getting below 1 micron, but we’ve long since smashed that barrier and are moving steadily towards the 1nm mark. How small can we go? No one is willing to call it quits yet at GF, and we expect to see additional creative solutions as we run into technological hurdles.

AMD Meetings: APUs Make a Big Splash
Comments Locked

72 Comments

View All Comments

  • DanNeely - Friday, January 7, 2011 - link

    It was TSMC that is skipping 32nm.
  • silverblue - Friday, January 7, 2011 - link

    Here's one such article that made us believe otherwise...

    http://www.xbitlabs.com/news/other/display/2010040...
  • mino - Friday, January 7, 2011 - link

    32nm bulk is NOT the same as 32nm SOI.

    The former was scrapped (in favor of 28nm) while the latter is in production as we speak.
  • silverblue - Friday, January 7, 2011 - link

    Thank you for the clarification.
  • Guspaz - Friday, January 7, 2011 - link

    A 100% improvement in standby battery life does not mean "100% less standby power", because that would mean it's using no power at all. They're saying battery life is doubled, which means that power is reduced by 50%.
  • krumme - Friday, January 7, 2011 - link

    Worlds fastest mobile GPU on page 4, under GF headline, and blended with tons of Optimus talk.
    Why do AMD care to communicate with Anandtech at all?
  • vol7ron - Friday, January 7, 2011 - link

    what? where?
  • mino - Friday, January 7, 2011 - link

    Umm, better question is: Why did AMD (again!) mess up their communication with a major IT site?

    I mean, it is not (primarily) AnandTech's job to make sure they get the proper info from AMD ...
  • Lolimaster - Friday, January 7, 2011 - link

    We all know anand (person and site) work with intel's dollars but please at least do a decent article. Even an amputated monkey can do something better.
  • mino - Friday, January 7, 2011 - link

    Sorry to spoil your party, but aside from a poor writing quality (which is OK in a news article), this article is anything but biased.

    (Form a guy regularly bashing AT for bias.)

Log in

Don't have an account? Sign up now