Investigating NVIDIA's Jetson AGX: A Look at Xavier and Its Carmel Cores
by Andrei Frumusanu on January 4, 2019 11:00 AM EST- Posted in
- NVIDIA
- SoCs
- Xavier
- Automotive
- Jetson
- Jetson AGX
Today’s piece is a bit of an unusual review; NVIDIA’s new Jetson AGX embedded system kit isn’t really a device platform we’re expecting the average reader to think about, much less buy. NVIDIA’s shift over the last few years from offering consumer grade Tegra chipsets to more specialised silicon applications isn’t any more evident than in the new Tegra Xavier which powers the Jetson AGX. While the board's capabilities certainly fall outside of the use-cases of most consumers, it still represents a very interesting platform with a lot of functionality and silicon IP that we don’t find in any other device to this day. So when NVIDIA reached out to offer us a sample, we decided to have a go at assembling a high-level overview of what the board and the new Xavier chip can do.
First of all, we have to describe what this actually is. The Jetson AGX is a full-fledged small form-factor computer / embedded system, with the form of the whole unit not any bigger than 105x105mm. The AGX module itself is designed to be a complete commercial off the shelf (COTS) system for use in finished products, with NVIDIA aiming it at AI (read: neural networking) centric use cases such as robotics and industrial automation. Jetson boards typically occupy the small-to-mid volume end of the market, showing up in one-off products and items with limited production runs, where it doesn't make sense for a manufacturer to develop and deploy their own custom hardware.
But of course the bare module is only half the story. You can't do development against a bare module, and this is where NVIDIA's complete Jetson AGX development kit comes in. The AGX dev kit comes with everything needed to run a single module, including a power supply, a heatsink, and more important of all, a breakout board. The breakout board offers various I/O headers and ports, ranging from your standard double USB-C 3.1 ports, HDMI connectors and Gigabit Ethernet ports, to more specialised connectivity such as MIPI CSI-2 connectors for camera connectivity and a range of typical development board headers such as a 40 pin GPIO connector.
The more unusual connectivity options of the Jetson AGX are the PCIe Gen4 x16 slot as well as a M.2 PCIe x1 extension slot that is meant to be used for connectivity add-ons such as WiFi or cellular modules, both features that aren’t common among Arm development board as most SoCs don’t have the spare PCIe controllers.
The board comes with many other connectors, and that’s one regard in which the new Jetson AGX doesn’t lack at all in flexibility. Power is supplied by an external generic 19V power supply – the stock one supplied by NVIDIA is a 65W LiteOn unit that seems no different than most laptop charger bricks.
Underneath the quite heavy and solid aluminium heatsink we find what actually powers the Jetson AGX board: the AGX Xavier module. This is a system module that sits on top of the Jetson motherboard – the module has no I/O ports by itself and merely serves as the brains of the system, integrating the core components surrounding the Xavier chip, such as the 16GB of LPDDR4x memory, a small 32GB eMMC storage chip as well as all the power delivery circuits for powering the different power rails of the DRAM as well as IP blocks of the Xavier SoC.
The Xavier chip, as said, is the brains of the platform and represents NVIDIA’s biggest and most complex SoC to date. With 9 billion transistors on a die size of 350mm², it’s among one of the heavyweights of the Arm ecosystem, although between its initial announcements and today Apple has one-upped NVIDIA in terms of transistor count as the new A12X is a 10B chip – in a much smaller manufacturing node.
Coming from the traditional PC industry, NVIDIA doesn’t shy away from showing die shots of their products, which is something that is quite rare these days among the Arm SoC vendors. The Xavier SoC is mainly dominated by two big IP blocks which consist of the majority of the space allocated on the die: The 8-core “Carmel” CPU complex as well as a four-cluster Volta GPU.
At the high level, the CPU complex contains 8 Carmel CPU cores configured in four clusters, each with a pair of Carmel CPU cores. Each cluster has an independent clock plane and shares a 2MB cache among two CPU cores. At the higher CPU complex level we find a 4MB L3 cache serving all clusters. We don’t know too much about the microarchitecture of the new Carmel cores - seemingly this looks to be a successor to NVIDIA’s Denver µarch, a design that was characterised by its dynamic code optimisation capability. The only thing that NVIDIA does advertise is that this is a 10-wide superscalar machine (10 execution ports in this case, not 10-wide decode) and has support for the ARMv8.2+RAS instruction set. We’ll come back to the CPU core later in the article.
The GPU in Xavier has its roots in the Volta architecture. Here we find the GPU configured into four TPC (Texture processing clusters), each with two SMs (Stream multiprocessors), for a total of 8 SMs or 512 ALU lanes/CUDA cores. A most interesting aspect of the GPU is that because it is based on Volta, it also inherits the Tensor processing units from its bigger brethren. This augments the total processing power of the GPU by up to 22.6 8-bit TOPs or 11.3 FP16 TOPS on the part of the Tensor cores, on top of the respectively 2.8 and 1.4 TFLOPs for FP16 and FP32 CUDA operations provided by the SMs.
Alongside the CPU and GPU there’s many other important blocks, many of which NVIDIA had covered already at its HotChips 2018 presentation last summer. The one block that really does augment the Xavier SoC is the new DLA IP block: this is very much a new type of block that follows the trend we’ve seen in the mobile SoC space – a dedicated machine inferencing acceleration unit not unlike that which we’ve seen from the likes of HiSilicon or Apple. NVIDIA’s DLA promises performances of up to 11.4 int8 TOPS and is also capable of FP16 operation at half speed at 5.7 TOPS. On the SoC, the unit is implemented as a dual-core instance.
Alongside the DLA, the programmable vision accelerator is again a key component of the Xavier system that allows it focus on vision and in particular robotics, embedded AI and automotive use-cases. The PVA is a more traditional vision IP block that handles more rudimentary tasks such as object detections in a much more efficient way than it would be able to be handled by the GPU or machine inferencing algorithms. Here the PVA will be the first IP block after the ISP in the vision pipeline that will serve to segment parts of an image into objects that will be then forwarded to other algorithms that then would happen on the GPU or DLA.
51 Comments
View All Comments
xype - Friday, January 4, 2019 - link
AnandTech is my reminder to turn the ad blocker back on if I turned it off for some reason. It’s insane how big of improvement in experience it is to block ads on AnandTech.Cellar Door - Friday, January 4, 2019 - link
It is just a matter of time before we will get a message 'turn of your adblocker to proceed' - at that point I will abandon this site. For now, ublock origin keeps this site in check for me.DanNeely - Friday, January 4, 2019 - link
FYI, 99% of the time I've found I could block notice complaining about having blocked various 3rd party malware distribution domains and still read the site with my crap blockers running.TheinsanegamerN - Friday, January 4, 2019 - link
Or just use the anti ad blocker blocker in ublock origin.HollyDOL - Friday, January 4, 2019 - link
I have to admit, AT taught me to install adblock, the level of ad annoyance climbed too high for me.I am still willing to pay a sub for a spam-free AT access.
linuxgeex - Friday, November 8, 2019 - link
It was THG that got me using AdBlock, but these days I turn off AdBlock on most of the sites I frequent and instead rely on ScriptSafe and Stylus to selectively disable the cruft. It's a little more work for me, but it allows sites I care about to still get revenue from the less annoying ad content, and I cross my fingers that they will learn to insert less annoying ads. Animated = blocked. Sound = bocked. Video = blocked. Causes content to jump around while loading = blocked. Inserts ads that look like navigation features = blocked (I'm looking at You, Google)Ryan Smith - Friday, January 4, 2019 - link
"Why are there video ads automatically playing on each one of the Anandtech pages?"Our publisher (Future) has decided that they want to have this ad unit on every page. Unfortunately there's not much more I can say than that; it's their call.
thesavvymage - Friday, January 4, 2019 - link
:(thesavvymage - Friday, January 4, 2019 - link
Could you at least speak to them on ad appropriateness? Mine are the usual low effort clickbait spam ads, or "The One Thing All Cheaters Have In Common" and "Seattle: Cable Companies are furious over this tiny device".Like I understand your publishers have to advertise, but crappy advertising like this gets the adblock treatment, point blank. Its an extremely frustrating experience for what is supposed to be a professional site.
Ryan Smith - Saturday, January 5, 2019 - link
"Could you at least speak to them on ad appropriateness?"It's something we discuss on a regular basis. Like any other ad-supported operation we're largely at the whims of the overall advertising market: who is willing to buy ads and at what price. On the whole, advertisers are being very cautious right now, especially with written publications.
Future's size helps a lot with this, since they're a top publisher and can move some very large deals. Not that it's a dire situation or anything nearly like that, but continual erosion in ad rates makes it difficult to get any ads rolled back.