A large number of column inches have been put towards describing and explaining AMD's new underlying scalable interconnect: the Infinity Fabric. A superset of HyperTransport, this interconnect is designed to enable both the CPUs and GPUs from AMD to communicate quickly, at high bandwidth, low latency, and with low power with the ability to scale out to large systems. One of the results of the implementation of Infinity Fabric on the processor side is that it runs at the frequency of the DRAM in the system, with a secondary potential uplift in performance when using faster memory. The debate between enthusiasts, consumers and the general populous in regards to Ryzen's memory performance and has been an ever-raging topic since the AGESA 1.0.0.6 BIOS updates were introduced several weeks ago. We dedicated some time to test the effect of high-performance memory on Ryzen using Team Group's latest Night Hawk RGB memory.

Memory Scaling on Ryzen 7: AMD's Infinity Fabric

Typically overlooked by many when outlining components for a new system, memory can a key role in system operation. For the last ten years, memory performance for consumers has been generally inconseqential on memory speed: we tested this for DDR3 for Haswell and DDR4 for Haswell-E, and two major conclusions came out of that testing:

  • As long as a user buys something above the bargain basement specification, performance is better than the worst,
  • Performance tapers to a point with memory, very quickly hitting large price increases for little gain,
  • The only major performance gain that scales comes from integrated gaming

So it is perhaps not surprising to read in forums that the general pervasive commentary is that “memory speed over DDR4-2400 does not matter and is a con by manufacturers”. This has the potential to change with AMD's Infinity Fabric, where the interconnect speed between sets of cores is directly linked with the memory speed. For any workload that transfers data between cores or out to main memory, the speed of the Infinity Fabric can potentially directly influence the performance. Despite the fact that pure speed isn’t always the ‘be all and end all’ of establishing performance gains, it has the potential to provide some gains with this new interconnect design.

The Infinity Fabric (hereafter shortened to IF) consists of two fabric planes: the Scalable Control Fabric (SCF) and the Scalable Data Fabric (SDF). 

The SCF is all about control: power management, remote management and security and IO. Essentially when data has to flow to different elements of the processor other than main memory, the SCF is in control.

The SDF is where main memory access comes into play. There's still management here - being able to organize buffers and queues in order of priority assists with latency, and the organization also relies on a speedy implementaiton. The slide below is aimed more towards the IF implementation in AMD's server products, such as power control on individual memory channels, but still relevant to accelerating consumer workflow.

AMD's goal with IF was to develop an interconnect that could scale beyond CPUs, groups of CPUs, and GPUs. In the EPYC server product line, IF connects not only cores within the same piece of silicon, but silicon within the same processor and also processor to processor. Two important factors come into the design here: power (usually measured in energy per bit transferred) and bandwidth.

The bandwidth of the IF is designed to match the bandwidth of each channel of main memory, creating a solution that should potentially be unified without resorting to large buffers or delays.

Discussing IF in the server context is a bit beyond the scope of what we are testing in this article, but the point we're trying to get across is that IF was built with a wide scope of products in mind. On the consumer platform, while IF isn't necessarily used to such a large degree as in server, the potential for the speed of IF to affect performance is just as high.

AGESA 1.0.0.6 (aka AGESA 1006) and Memory Support

At the time of the launch of Ryzen, a number of industry sources privately disclosed to us that the platform side of the product line was rushed. There was little time to do full DRAM compatibility lists, even with standard memory kits in the marketplace, and this lead to a few issues for early adopters to try and get matching kits that worked well without some tweaking. Within a few weeks this was ironed out when the memory vendors and motherboard vendors had time to test and adjust their firmware.

Overriding this was a lower than expected level of DRAM frequency support. During the launch, AMD had promized that Ryzen would be compatible with high speed memory, however reviewers and customers were having issues with higher speed memory kits (3200 MT/s and above) . These issues have been addressed via a wave of motherboard BIOS updates built upon an updated version of the AGESA (AMD Generic Encapsulated Software Architecture), specifically up to version 1.0.0.6.

Given that the Ryzen platform itself has matured over the last couple of months, now is the time for a quick test on the scalability on AMDs Zen architecture to see if performance can scale consistency with raw memory frequency, or if any performance gains are achieved at all. For this testing we are using Team Group's latest Night Hawk RGB memory kit at several different memory straps under our shorter CPU and CPU gaming benchmark suites.

Recommended Reading

Team Group's Night Hawk RGB Memory: 2x8GB of DDR4-3000 CL16
Comments Locked

65 Comments

View All Comments

  • notashill - Wednesday, September 27, 2017 - link

    There's a new AGESA 1.0.0.6b but AMD has said very little about what changed in it.
  • JocPro - Wednesday, September 27, 2017 - link

    According to page 3, how come 2933 MT/s (67 MT/s apart of the rated bandwidth) is *nearest* to the kit's rating, if 3066 MT/s is just 66 MT/s apart of the kit's rating?
  • DanNeely - Wednesday, September 27, 2017 - link

    Because rounding. They're 2933.33333.... and 3066.66666..... Both are 66.6666.... off and XMP (which is how the DIMM maker specifies what to do) rounds to the lower one not the higher one.
  • DanNeely - Wednesday, September 27, 2017 - link

    In theory anyway. In practice manufacturing variance (not sure if CPU or mobo) means the step size won't be exactly 133.3333.... but rather slightly higher or lower than that value.
  • FreckledTrout - Wednesday, September 27, 2017 - link

    For those prices I would rather pick up G Skill Flare x running at 3200Mhz and CAS14 ($190 on newegg).
  • qlum - Wednesday, September 27, 2017 - link

    While it is an older lgame it would have been interesting to see fallout 4 included here as it is notorious for its memory scaling
  • Outlander_04 - Wednesday, September 27, 2017 - link

    I am curious about the use of such an old graphics card. Surely an nVidia 10xx card, or RX vega was available
  • Lolimaster - Wednesday, September 27, 2017 - link

    Come one, people are running 3200 CL14 on Ryzen for many months, why test with a puny CL16.

    This should also include DDR4 3600-4000 with many brands.
  • Nagorak - Thursday, September 28, 2017 - link

    Few have even managed to get 3600 MHz stable with Ryzen, let alone anything more than that. Even 3466 isn't a given for many boards/processors.
  • CheapSushi - Thursday, September 28, 2017 - link

    I think it is time for RAM to go the QDR route (quad data rate) instead for upcoming DDR5. It's already proven and workable in SRAM and GDDR5X (it's QDR despite the name. This would be a MUCH more significant improvement in latency and I/O than the paltry MHz bump DDR5 will do. I think AMD's Zen architecture would benefit and go even further with QDR for next gen.

    Image of QDR vs DDR: https://upload.wikimedia.org/wikipedia/commons/thu...

    Image of QDR vs DDR: http://image.slideserve.com/1303208/qdr-class-vs-d...

Log in

Don't have an account? Sign up now